Welcome to Gasolec, Your partner in livestock environment
DISCLAIMER
Although due care was applied in order to guarantee correctness of the information stated on the web site, Gasolec does not assume any liability in this matter. All information is provided "in the condition it finds itself in" and "as available". Consequently, no rights may be derived from the information as stated on this web site.
Concept and realisation
The design and technical realisation of this web site were performed by Designpro.
Direct contact
Infrared heating
-
Heaters
-
Gas pressure regulation
-
Gas cylinder connections
-
Parts for Heaters
-
Reflector S-series
-
Ceramic Stone (S)
-
Safety Device (S/M)
-
Hose Socket (S/M/G)
-
Burner House (S-series)
-
Eye-screw Tee-Piece (S/M)
-
Jet Holder, incl. circlip
-
Dust Filter Standard (S/M)
-
Dust Filter HD (S/M)
-
Marking plates (S/M)
-
Burner pipe M8
-
Round Burner M8
-
Thermocouple S-series / M2 / M3
-
Thermocouple M5/M8
-
Jet 27 (M-series)
-
Tee-piece Special M-Type
-
Venturi (S/M)
-
Thermo Unit
-
Reflector M2/M3
-
Reflector M5/M8
-
Round Burner M2
-
Round Burner M3
-
Round Burner M5
-
Suspension Frame M2/M3
-
Suspension Frame M5/M8
-
Burner Pipe M2
-
Burner Pipe M3
-
Burner Pipe M5
-
Suspension hook M5/M8
-
Rivet stainless steel
-
Safety Device G-series
-
Dust Filter G-series
-
Thermocouple G12
-
Solenoid G12 Asco
-
Magnetic Coil (S/M/G)
-
G12 Solenoid Coil
-
Jet G12
-
Pilot Flame Guide G12
-
Pilot Flame Bracket
-
Pilot Gas Pipe G12
-
Pilot Cover G12
-
G12 Adapter
-
Pilot Jet G12
-
Venturi G12
-
Jet Retainer G12
-
G12 Emitter
-
Bottom Plate Emitter G12
-
Top Plate Emitter G12
-
Burner Unit G12
-
Reflector G12
-
Jet Holder G12
-
Sensor Bracket G12 Maxi
-
Maxitrol Thermostat G12
-
Sensor Thermostat G12
-
Circlip (for jet holder)
-
Screw + Spring Ring (M)
-
Short Spacer G12
-
Long Spacer G12
-
Connecting Rod G12
-
Connecting Eye Rod G12
-
Thermocouple Holder G12
-
Chain G12
-
Gas Hose
-
Hose Clamp
-
Shut off valve
-
The Gasolec Infrared Radiant Gas Heaters are like small suns that provide radiant heat for optimum living conditions for the animals. These heaters are available for either Propane/LPG or Natural Gas High or Natural Gas Low so Gasolec can provide you with a solution for most...
Read more
Lighting
-
Heaters
-
Gas pressure regulation
-
Gas cylinder connections
-
Parts for Heaters
-
Reflector S-series
-
Ceramic Stone (S)
-
Safety Device (S/M)
-
Hose Socket (S/M/G)
-
Burner House (S-series)
-
Eye-screw Tee-Piece (S/M)
-
Jet Holder, incl. circlip
-
Dust Filter Standard (S/M)
-
Dust Filter HD (S/M)
-
Marking plates (S/M)
-
Burner pipe M8
-
Round Burner M8
-
Thermocouple S-series / M2 / M3
-
Thermocouple M5/M8
-
Jet 27 (M-series)
-
Tee-piece Special M-Type
-
Venturi (S/M)
-
Thermo Unit
-
Reflector M2/M3
-
Reflector M5/M8
-
Round Burner M2
-
Round Burner M3
-
Round Burner M5
-
Suspension Frame M2/M3
-
Suspension Frame M5/M8
-
Burner Pipe M2
-
Burner Pipe M3
-
Burner Pipe M5
-
Suspension hook M5/M8
-
Rivet stainless steel
-
Safety Device G-series
-
Dust Filter G-series
-
Thermocouple G12
-
Solenoid G12 Asco
-
Magnetic Coil (S/M/G)
-
G12 Solenoid Coil
-
Jet G12
-
Pilot Flame Guide G12
-
Pilot Flame Bracket
-
Pilot Gas Pipe G12
-
Pilot Cover G12
-
G12 Adapter
-
Pilot Jet G12
-
Venturi G12
-
Jet Retainer G12
-
G12 Emitter
-
Bottom Plate Emitter G12
-
Top Plate Emitter G12
-
Burner Unit G12
-
Reflector G12
-
Jet Holder G12
-
Sensor Bracket G12 Maxi
-
Maxitrol Thermostat G12
-
Sensor Thermostat G12
-
Circlip (for jet holder)
-
Screw + Spring Ring (M)
-
Short Spacer G12
-
Long Spacer G12
-
Connecting Rod G12
-
Connecting Eye Rod G12
-
Thermocouple Holder G12
-
Chain G12
-
Gas Hose
-
Hose Clamp
-
Shut off valve
-
The importance of light intensity and light color are characteristic in the Gasolec approach to lighting animals. It started with monochromatic compact fluorescent lamps in green, blue, red and white and this continues in the latest DimTo LED lamps as well as the multi color LED...
Read more
Markets
-
Heaters
-
Gas pressure regulation
-
Gas cylinder connections
-
Parts for Heaters
-
Reflector S-series
-
Ceramic Stone (S)
-
Safety Device (S/M)
-
Hose Socket (S/M/G)
-
Burner House (S-series)
-
Eye-screw Tee-Piece (S/M)
-
Jet Holder, incl. circlip
-
Dust Filter Standard (S/M)
-
Dust Filter HD (S/M)
-
Marking plates (S/M)
-
Burner pipe M8
-
Round Burner M8
-
Thermocouple S-series / M2 / M3
-
Thermocouple M5/M8
-
Jet 27 (M-series)
-
Tee-piece Special M-Type
-
Venturi (S/M)
-
Thermo Unit
-
Reflector M2/M3
-
Reflector M5/M8
-
Round Burner M2
-
Round Burner M3
-
Round Burner M5
-
Suspension Frame M2/M3
-
Suspension Frame M5/M8
-
Burner Pipe M2
-
Burner Pipe M3
-
Burner Pipe M5
-
Suspension hook M5/M8
-
Rivet stainless steel
-
Safety Device G-series
-
Dust Filter G-series
-
Thermocouple G12
-
Solenoid G12 Asco
-
Magnetic Coil (S/M/G)
-
G12 Solenoid Coil
-
Jet G12
-
Pilot Flame Guide G12
-
Pilot Flame Bracket
-
Pilot Gas Pipe G12
-
Pilot Cover G12
-
G12 Adapter
-
Pilot Jet G12
-
Venturi G12
-
Jet Retainer G12
-
G12 Emitter
-
Bottom Plate Emitter G12
-
Top Plate Emitter G12
-
Burner Unit G12
-
Reflector G12
-
Jet Holder G12
-
Sensor Bracket G12 Maxi
-
Maxitrol Thermostat G12
-
Sensor Thermostat G12
-
Circlip (for jet holder)
-
Screw + Spring Ring (M)
-
Short Spacer G12
-
Long Spacer G12
-
Connecting Rod G12
-
Connecting Eye Rod G12
-
Thermocouple Holder G12
-
Chain G12
-
Gas Hose
-
Hose Clamp
-
Shut off valve
-
Animal production inside buildings means understanding the needs of both the animals and the farmer as well as knowing the technology used. Poultry kept on one level requires different heating and lighting solutions from poultry kept on multiple levels and the same is true for...
Read more-
Heaters
-
Gas pressure regulation
-
Gas cylinder connections
-
Parts for Heaters
-
Reflector S-series
-
Ceramic Stone (S)
-
Safety Device (S/M)
-
Hose Socket (S/M/G)
-
Burner House (S-series)
-
Eye-screw Tee-Piece (S/M)
-
Jet Holder, incl. circlip
-
Dust Filter Standard (S/M)
-
Dust Filter HD (S/M)
-
Marking plates (S/M)
-
Burner pipe M8
-
Round Burner M8
-
Thermocouple S-series / M2 / M3
-
Thermocouple M5/M8
-
Jet 27 (M-series)
-
Tee-piece Special M-Type
-
Venturi (S/M)
-
Thermo Unit
-
Reflector M2/M3
-
Reflector M5/M8
-
Round Burner M2
-
Round Burner M3
-
Round Burner M5
-
Suspension Frame M2/M3
-
Suspension Frame M5/M8
-
Burner Pipe M2
-
Burner Pipe M3
-
Burner Pipe M5
-
Suspension hook M5/M8
-
Rivet stainless steel
-
Safety Device G-series
-
Dust Filter G-series
-
Thermocouple G12
-
Solenoid G12 Asco
-
Magnetic Coil (S/M/G)
-
G12 Solenoid Coil
-
Jet G12
-
Pilot Flame Guide G12
-
Pilot Flame Bracket
-
Pilot Gas Pipe G12
-
Pilot Cover G12
-
G12 Adapter
-
Pilot Jet G12
-
Venturi G12
-
Jet Retainer G12
-
G12 Emitter
-
Bottom Plate Emitter G12
-
Top Plate Emitter G12
-
Burner Unit G12
-
Reflector G12
-
Jet Holder G12
-
Sensor Bracket G12 Maxi
-
Maxitrol Thermostat G12
-
Sensor Thermostat G12
-
Circlip (for jet holder)
-
Screw + Spring Ring (M)
-
Short Spacer G12
-
Long Spacer G12
-
Connecting Rod G12
-
Connecting Eye Rod G12
-
Thermocouple Holder G12
-
Chain G12
-
Gas Hose
-
Hose Clamp
-
Shut off valve
-
-
Heaters
-
Gas pressure regulation
-
Gas cylinder connections
-
Parts for Heaters
-
Reflector S-series
-
Ceramic Stone (S)
-
Safety Device (S/M)
-
Hose Socket (S/M/G)
-
Burner House (S-series)
-
Eye-screw Tee-Piece (S/M)
-
Jet Holder, incl. circlip
-
Dust Filter Standard (S/M)
-
Dust Filter HD (S/M)
-
Marking plates (S/M)
-
Burner pipe M8
-
Round Burner M8
-
Thermocouple S-series / M2 / M3
-
Thermocouple M5/M8
-
Jet 27 (M-series)
-
Tee-piece Special M-Type
-
Venturi (S/M)
-
Thermo Unit
-
Reflector M2/M3
-
Reflector M5/M8
-
Round Burner M2
-
Round Burner M3
-
Round Burner M5
-
Suspension Frame M2/M3
-
Suspension Frame M5/M8
-
Burner Pipe M2
-
Burner Pipe M3
-
Burner Pipe M5
-
Suspension hook M5/M8
-
Rivet stainless steel
-
Safety Device G-series
-
Dust Filter G-series
-
Thermocouple G12
-
Solenoid G12 Asco
-
Magnetic Coil (S/M/G)
-
G12 Solenoid Coil
-
Jet G12
-
Pilot Flame Guide G12
-
Pilot Flame Bracket
-
Pilot Gas Pipe G12
-
Pilot Cover G12
-
G12 Adapter
-
Pilot Jet G12
-
Venturi G12
-
Jet Retainer G12
-
G12 Emitter
-
Bottom Plate Emitter G12
-
Top Plate Emitter G12
-
Burner Unit G12
-
Reflector G12
-
Jet Holder G12
-
Sensor Bracket G12 Maxi
-
Maxitrol Thermostat G12
-
Sensor Thermostat G12
-
Circlip (for jet holder)
-
Screw + Spring Ring (M)
-
Short Spacer G12
-
Long Spacer G12
-
Connecting Rod G12
-
Connecting Eye Rod G12
-
Thermocouple Holder G12
-
Chain G12
-
Gas Hose
-
Hose Clamp
-
Shut off valve
-
