Welcome to Gasolec, Your partner in livestock environment
Poultry Floorlevel and Multilevel

T1+ series LED Tubes (single colour)

The Prolucent lighting tubes provide an uniform light distribution by using 72 LEDs and an opaque finish. Unlike other LED tubes that create point source lighting, we reduce stress by equal distribution of light. The low voltage system (48Vdc) is the perfect balance between safety and efficiency. With this 48 Volts dc setup there is less chance of power loss compared to 24 or 12Vdc. Due to the DC current, the T-series tubes are always flicker free. 

The light tubes themselves do not consist out of a great number of parts. A solid, simple and considerate design makes it reliable, affordable and easy to install. Other important features are:

  • IP69K Waterproof
  • 5.5 or 9.6 Watt output versions
  • Anti-pecking electric wire (extra coating)
  • 48 Vdc (fire safety precaution)
  • 0 to 100% dimmable | flicker free
  • High Lumen per Watt ratio
  • Different colours available
  • Optional with multiple colours in 1 tube (T2+ series)

The T-series LED tubes are specifically designed for usage in harsh environments.

DC Safety Dimmer
We developed our DC Safety Dimmer especially for regulating the output of DC lamps. It has 2 power input channels (max. 8Amp) and 4 power output channels. This dimmer has built in safety functions where it checks the outgoing power supply to the lamps. The DC dimmer detects alarming situations, like overheating, broken wiring and broken lamps. The corresponding output shuts down when a fault is detected and shows this error. At the same time this DC dimmer is equipped with an alarm relay that can be connected to the central alarm system.  

Scroll below for more information about the T1-tubes.

  • Specifications


    LED T1+ tube

    Lumen Output555 Lumen947 Lumen690 Lumen
    Nominal power5,5 Watt9,6 Watt5,5 Watt
    Lumen/Watt efficiency101 Lm/W99 Lm/W125 Lm/W
    Light spectral output3000K | Warm white3000K | Warm white

    Special white

    DimmableYes | 0 – 100% | Flicker Free
    Operating temperature45°C / 113˚F
    Input voltage48Vdc
    Number of LED's72
    Beam angle129°
    WaterproofIP69K | Highest possible rating
    UsageLayer | Pullet | Breeding | Broiler cages
  • Main advantages

    Main advantages

    • Saves up to 90% in energy compared to incandescent bulbs
    • IP69K Waterproof: maintenance friendly
    • 5,5W and high output 9.6W version
    • Interconnectable system : 2 pin connector | fast installation | easy to replace
    • Different LED colours available
    • Up to 60 units can be connected to 1 dimmer
    • Special designed Safety Dimmer with Alarm relay
    • Even light distribution
    • High lumen per Watt ratio (99 to 125 Lm/W)
    • No heat problems
    • Internal resettable fuse
    • 72 LED’s driven at low current
    • Anti pecking electrical wire (extra coating)
    • Safe: 48 Vdc
    • 0 to 100% dimmable | flicker free
    • Optional with multiple colours in 1 tube (T2+ series)
  • Different colours

    Different colours

    T1+ PLT14801 & PLT14803 | Warm white (3000K)​​​​​​


    T1+ PLT14802 | Special white 

  • 48 Vdc Dimmer

    48 Vdc Dimmer

    A few features of the Prolucent T-series dimmer are:

    • Voltage: 14-48 DC;
    • High power frequency > 2kHz;
    • Overheating and overload protection;
    • Auto slow fading: to avoid stress induction & flickering;
    • 4 Control inputs: to control the dim levels of 4 channels;
    • Can be used as 0-10V input or to connect potentiometer (10K pot meter);
    • Safety function: automatic system shut down if a flaw is detected;
    • Equiped with an alarm relay that can be connected to a central alarm system;
    • Din rail mountable: the dimmer can be installed within standard wiring cabinets.

    T2+ series (multicolour)
    Programs can be installed to change the colour output automatically in different time zones (for T2-series). This is, among others, useful so that the animals will not get used to one specific colour spectrum and hereby lose the effectiveness.

  • Accessories


    Extension cords – IP69K
    Each LED Tube is equipped with a section of electric cable, usually 60cm, with a special IP69K connector. Normally for the start of each row of LED Tubes as well as in situations where the distance between lamps is more, extension cords are necessary.  The extension cords for the T1+ series are with 2 leads and  2-pin connectors.


  • Product documents
Direct contact

Direct contact

Vul uw contactgegevens in
Stay informed: Receive our newsletter now

Stay up to date with the latest news? Sign up here and receive our newsletter!

Sign Up

Stay informed